Description: Tray 2 elevator failure
• The lift-up sensor is not blocked even after the lapse of a given period of time after the lifting motion has been started.
Remedy: 1 Check the M3-PC connector for proper connection and correct as necessary. 2 Check the connector of M3-PC for proper drive coupling and correct as necessary. 3 PC7-PC I/O check, sensor check PCCB PJ6PCCB-3 (ON) S-24. 4 M3-PC operation check PCCB PJ4PCCB-4 to 5 M-27. 5 Change PCCB