Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi C3451 — Konica-Minolta bizhub C352P

Code: C3451

Description: Heat. heater trouble
• The heating roller thermistor/1 (TH1) fails to raise a given degree of temperature even after the lapse of a given period of time after the Heating roller heater lamp/1 (H1) is turned ON. • When the warm up started and the highest temperature and the lowest temperature of the heating roller thermistor/1 (TH1) are compared for the specified period of time, the difference of these two is either lower than the specified value or at the specified value or over. • During the warm up, if the counted value for zero cross signal input is not modified for the specified period of time, the zero cross signal error will be counted. This malfunction will be detected when the counted value exceeds the specified value.
Remedy: 1 Check the fusing unit for correct installation (whether it is secured in position). 2 Check the open/close operation of the right door. 3 Check the fusing unit, MFPB and DCPU for proper connection and correct or change as necessary. 4 Change fusing unit. 5 Change MFPB. 6 Change DCPU.

← Xem tất cả mã lỗi Konica-Minolta bizhub C352P

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie