Code: C6102
Description: Drive home sensor malfunction
• The scanner home sensor is unable to detect the scanner located at its home position. • The scanner home sensor is unable to detect a scanner even when the scanner motor has been driven to move the scanner over the maximum travelling distance. • The scanner home sensor detects the scanner when the scanner has moved 5 mm from the position, at which it blocks the scanner Home Sensor.
• The scanner home sensor is unable to detect the scanner located at its home position. • The scanner home sensor is unable to detect a scanner even when the scanner motor has been driven to move the scanner over the maximum travelling distance. • The scanner home sensor detects the scanner when the scanner has moved 5 mm from the position, at which it blocks the scanner Home Sensor.
Remedy: 1 Correct or change the scanner drive (cable, pulley, gear, belt) if it is faulty. 2 Correct the scanner motor set screw if loose. 3 Adjust [Image Position Leading Edge] and [Feed Direction Adjustment]. 4 Check the PC201, M201, SCADB and IPB connector for proper connection and correct as necessary. 5 PC201 I/O check, sensor check IPB PJ11IPB-8 (ON) T-13 6 M201 operation check SCADB PJ3SCADB-1 (REM) SCADB PJ3SCADB-3 (LOCK) Y-7. 7 Change SCADB. 8 Change IPB.