Code: 2202
Description: Developing motor malfunction
• The motor lock signal remains HIGH for a predetermined continuous period of time while the motor is turning. • The motor does not reach its steady rotating state even after the lapse of a predetermined period of time after it has been started.
• The motor lock signal remains HIGH for a predetermined continuous period of time while the motor is turning. • The motor does not reach its steady rotating state even after the lapse of a predetermined period of time after it has been started.
Causes: • Developing motor (M3) • Printer control board (PRCB)
Remedy: 1 Check the connector between M3-PRCB CN8 for proper connection and correct as necessary. - - 2 Check the M3 connector for proper drive coupling and correct as necessary. - - 3 M3 operation check PRCB CN8-3 to 6 7-J