Code: 5501
Description: AC signal abnormality
The zero cross signal is not input during fusing phase control.
The zero cross signal is not input during fusing phase control.
Causes: • Fusing unit • DC power supply (DCPS) • Printer control board (PRCB)
Remedy: 1 Check the fusing unit for correct installation (whether it is secured in position). - - 2 Check the fusing unit-PRCB CN15, DCPS CN2 for proper connection and correct or change as necessary - - 3 Replace fusing unit - - 4 Replace PRCB - - 5 Replace DCPS