Code: C161
Description: Firmware update error
A firmware updating sequence is not normally terminated.
A firmware updating sequence is not normally terminated.
Causes: MFP board (MFPB)
Remedy: 1 Check the cable used for updating the firmware for proper connection and correct any faulty connection as necessary. - - 2 Check the firmware updating file; if the file is not correct, update the firmware again. - - 3 Check the firmware updating procedure; if the procedure is not correct, update the firmware again. 4 Update the firmware again. 5 Check the MFPB connector for proper connection and correct any faulty connection as necessary. 6 Replace MFPB