Description: Tray 3 PC transport motor malfunction The motor lock signal remains HIGH for a predetermined continuous period of time while the motor is turning.
Causes: <When PF-P13 is installed> • PC transport motor (M51) • MFP board (MFPB) • PC control board (PCCB)
Remedy: 1. Check the connector between M51-PCCB PJ3 for proper connection and correct as necessary. 2. Check the connector between PCCB PJ1-relay CN154-PCCB PJ2 for proper connection and correct as necessary. 3. Check the connector between PCCB PJ1-relay CN153-MFPB CN7E for proper connection and correct as necessary. 4. Check the connector of M51 for proper drive coupling and correct as necessary. 5. M51 operation check • Control signal: PCCB PJ3-4 to 8 • Location of electrical component: 12-U to V 6. Replace M51. 7. Replace PCCB. 8. MFPB F8E conduction check 9. Replace MFPB.