Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi C1103 — Konica-Minolta bizhub C3851

Code: C1103

Description: CD alignment motor/Fr malfunction <bizhub C3851FS> • The CD alignment plate home sensor/Fr (FSPS2) is not turned OFF (unblocked) even after the lapse of a given period of time after the CD alignment motor/Fr (FSM2) is turned ON at start from the home position. • The CD alignment motor/Fr (FSM2) is not drive completion after the set period of time has elapsed even after the start of driving. • The CD alignment plate home sensor/Fr (FSPS2) is not turned ON (blocked) even after the lapse of a given period of time after the CD alignment motor/Fr (FSM2) is turned ON at the initial operation.
Causes: • CD alignment motor/Fr (FSM2) • CD alignment plate home sensor/Fr (FSPS2) • FS control board (FSCB)
Remedy: 1. Check the connector between FSM2-relay CN22-FSCB CN10 for proper connection and correct as necessary. 2. Check the connector of FSM2 for proper drive coupling, and correct as necessary. 3. Check the connector between FSPS2-FSCB CN10 for proper connection and correct as necessary. 4. FSPS2 I/O check, sensor check • Control signal: FSCB CN10-7 • Location of electrical component: 24-Q 5. FSM2 operation check • Control signal: FSCB CN10-1 to 4 • Location of electrical component: 24-Q 6. Replace FSM2. 7. Replace FSCB.

← Xem tất cả mã lỗi Konica-Minolta bizhub C3851

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie