Description: Stapler motor home position return malfunction <bizhub C3851FS> • When the stapler unit starts driving from the home position, the stapler home sensor is not turned ON (blocked) even after the lapse of a given period of time after the stapler motor turned ON, and the stapler home sensor is not turned ON (blocked) even after the lapse of a given period of time after the stapler motor drives to the reverse direction. • When the stapler unit is returned to the home position, the stapler home sensor is not turned ON (blocked) even after the lapse of a given period of time after the stapler motor turned ON, and the stapler home sensor is not turned ON (blocked) even after the lapse of a given period of time after the stapler motor drives to the reverse direction.
Causes: • Stapler unit • FS control board (FSCB)
Remedy: 1. Check the connector between the stapler unit-relay CN43-FSCB CN5 for proper connection and correct as necessary. 2. Check the connector of the stapler unit for proper drive coupling, and correct as necessary. 3. Stapler home sensor I/O check, sensor check • Control signal: FSCB CN5-5 • Location of electrical component: 21-W 4. Replace the stapler unit. 5. Replace FSCB.