Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi C0211 — Konica-Minolta bizhub C3851FS

Code: C0211

Description: Manual feed up/down abnormality • The manual tray liftup position sensor (PS14) is not turned ON (unblocked) even after the manual tray liftup motor (M7) rotates for a given period of time after the position is switched from stand by position at lift-up plate to the feed position. • The manual tray liftup position sensor (PS14) is not turned OFF (blocked) even after the manual tray liftup motor (M7) rotates for a given period of time after the position is switched from stand by position at lift-up plate to the feed position.
Causes: • Manual tray liftup motor (M7) • Manual tray liftup position sensor (PS14) • MFP board (MFPB)
Remedy: 1. Check the connector between M7-relay CN205-relay CN203-MFPB CN25E for proper connection and correct as necessary. 2. Check the connector of M7 for proper drive coupling and correct as necessary. 3. Check the connector between PS14-relay CN203-MFPB CN25E for proper connection and correct as necessary. 4. PS14 I/O check, sensor check • Control signal: MFPB CN25E-5 (ON) • Location of electrical component: 8-C 5. M7 operation check • Control signal: MFPB CN25E-1 to 2 • Location of electrical component: 7-C 6. Replace M7. 7. MFPB F11E conduction check 8. Replace MFPB.

← Xem tất cả mã lỗi Konica-Minolta bizhub C3851FS

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie