Description: Exposure LED lighting abnormally. The average output value of the CCD sensor with the scanner at its standby position is a predetermined value or more at the end of a scan job.
Causes: • Scanner unit • MFP board (MFPB)
Remedy: 1. Check the connector between scanner unit-MFPB CN23, CN103 for proper connection and correct as necessary. 2. Check for possible extraneous light and correct as necessary. 3. Clean the lens, mirrors, CCD surface, and shading sheet if dirty. 4. Replace the scanner unit. 5. MFPB ICP7, PTC802E conduction check 6. Replace MFPB.