Code: C3101
Description: Fusing roller separation failure
• With the fusing roller being retracted, the pulse of the encoder sensor does not change even after the specified period of time has passed after the fusing pressure retraction motor started rotating. • With the fusing roller being pressed, the encoder pulse sensor does not change even after the specified period of time has passed after the fusing pressure retraction motor started rotating. • With the pressure roller being pressed, the pressure home sensor did not turn ON (pressed) even after the fusing retraction position sensor counted up the specified number of pulse after the fusing pressure retraction motor started rotating.
• With the fusing roller being retracted, the pulse of the encoder sensor does not change even after the specified period of time has passed after the fusing pressure retraction motor started rotating. • With the fusing roller being pressed, the encoder pulse sensor does not change even after the specified period of time has passed after the fusing pressure retraction motor started rotating. • With the pressure roller being pressed, the pressure home sensor did not turn ON (pressed) even after the fusing retraction position sensor counted up the specified number of pulse after the fusing pressure retraction motor started rotating.
Causes: Roller pressure welding alienation sensor (PS55) Fusing pressure retraction motor (M29) Printer control board (PRCB) Fusing unit
Remedy: 1 Check the M29 connector for proper connection and correct as necessary. - - 2 PS55 I/O check, sensor check - - 3 M29 operation check PRCB CN8-3 to 4 C-16 4 Change M29 - - 5 Change fusing unit - - 6 Change PRCB