Description: IH malfunction (monitor) • Though the IH heater is ON, this status cannot be detected mechanically. (IH heater operation failure) •Though the IH heater is OFF, mechanically, the ON status is detected. (Malfunction of IH heater operation)
Causes: Fusing unit IH coil unit IH power supply (IHPU) Relay drive board (REDB) Printer control board (PRCB)
Remedy: 1 Check the fusing unit for correct installation (whether it is secured in position). - - 2 Check the open/close operation of the upper right door. - - 3 Check the fusing unit, degaussing coil unit, IHPU, PRCB and REDB for proper connection and correct or change as necessary. - - 4 Change fusing unit - - 5 Change IH coil unit - - 6 Change IHPU - - 7 Change PRCB - - 8 Change REDB