Description: CIS clamp adjustment failure • After the gain adjustment is performed at the start-up, the CIS clamp adjustment value is too high or too low.
Remedy: 1 Correct the harness connection between CIS and DSIPB if faulty. - - 2 Correct the harness connection between CIS and CINVB if faulty. - - 3 Correct the harness connection between CIS and CISPU if faulty. - - 4 Check for possible extraneous light and correct as necessary. - - 5 Clean the back side reading glass and the shading sheet if dirty. - - 6 Change CIS - - 7 Change DSIPB - - 8 Change CINVB - - 9 Change CISPU - - 10 Change MFPB