Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi C6754, C6755 — Konica-Minolta bizhub C458

Code: C6754, C6755

Description: • C6754: CIS clamp adjustment failure (When DF-704 is installed) • C6755: CIS gain adjustment failure (When DF-704 is installed) • C6754: After the gain adjustment is performed at the start-up, the CIS clamp adjustment value is too high or too low. • C6755: After the gain adjustment is performed at the start-up, the peak value of the output data is lower than a given value.
Causes: • CIS module (CIS) • Dual scan image processing board (DSIPB) • CIS power supply (CISPU) • MFP board (MFPB)
Remedy: 1. Correct the harness connection between CIS and DSIPB if faulty. 2. Correct the harness connection between CIS J222-CISPU J2 if faulty. 3. Check for possible extraneous light and correct as necessary. 4. Clean the back side reading glass and the shading sheet if dirty. 5. Replace CIS. 6. Replace DSIPB. 7. Replace CISPU. 8. Replace MFPB.

← Xem tất cả mã lỗi Konica-Minolta bizhub C458

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie