Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi C11E0 — Konica-Minolta bizhub C552

Code: C11E0

Description: Duplex path switching motor drive malfunction
<When FS-527 is installed> •The duplex path switching sensor (PS3) is turned neither ON nor OFF even after the set period of time has elapsed after the duplex path switching motor (M2) is turned ON.
Finisher route change malfunction
<When JS-504 is installed> •The route change home sensor (PS4) is not blocked after the set period of time has elapsed after the route change motor (M3) is turned ON (start of shifting to the lower tray route.) •The route change home sensor (PS4) is not unblocked after the set period of time has elapsed after the route change motor (M3) is turned ON (start of shifting to the upper tray route.)
Causes: When FS-527 is installed: Duplex path switching motor (M2) Duplex path switching sensor (PS3)FS control board (FSCB).
When JS-504 is installed: Route change motor (M3) Route change home sensor (PS4) JS control board (JSCB)
Remedy: When FS-527 is installed: 1 Check the motor and sensor connectors for proper connection, and correct as necessary. - - 2 Check the connector of M2 for proper drive coupling, and correct as necessary. - - 3 PS3 I/O check, sensor check FSCB PJ11-6 (ON) FS-527 I-11 4 M2 operation check FSCB PJ29-1 to 3 FS-527 I-12 5 Change M2 - - 6 Change FSCB.
When JS-504 is installed: 1 Check the motor and sensor connectors for proper connection, and correct as necessary. - - 2 Check the connector of M3 for proper drive coupling, and correct as necessary. - - 3 PS4 I/O check, sensor check JSCB PJ7JSCB-15 (ON) JS-504 F-4 4 M3 operation check JSCB PJ6JSCB-1 to 2 JS-504 F-6 5 Change M3 - - 6 Change JSCB

← Xem tất cả mã lỗi Konica-Minolta bizhub C552

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie