Description: Exposure turning on the lamp trouble detection • The output from the CCD sensor is a predetermined value or less during CCD sensor gain adjustment.
Remedy: 1 Check the connection between the lamp harness and the inverter board, and correct if necessary. - - 2 Check the connection between REYB/ SCAN and the inverter board, and correct if necessary. - - 3 Check the connection between REYB/ SCAN and MFPB, and correct if necessary. - - 4 Check that the connection between CCDB and MFPB, and correct if necessary. - - 5 Change INVB - - 6 Change exposure unit - - 7 Change CCDB - - 8 Change REYB/SCAN - - 9 Change MFPB