Description: Tray 2 feeder up/down abnormality • The tray 2 upper limit sensor is not blocked even after the lapse of a given period of time after the lifting motion has been started.
Causes: Tray 2 upper limit sensor (PS14) Tray 2 lift-up motor (M8) Paper feed/transport drive board (PFTDB) Printer control board (PRCB)
Remedy: 1 Check the M8 connector for proper connection and correct as necessary. - - 2 Check the connector of M8 for proper drive coupling and correct as necessary. - - 3 PS14 I/O check, sensor check PFTDB CN10<B>-10 (ON) Q-4 4 M8 operation check PFTDB CN22-9 to 10 X-4 5 Change M8 - - 6 Change PFTDB - - 7 Change PRCB