Description: Tray 3 feeder up/down abnormality • The tray 3 upper limit sensor is not blocked even after the lapse of a given period of time after the lifting motion has been started.
Causes: Tray 3 upper limit sensor (PS22) Tray 3 lift-up motor (M23) Paper feed/transport drive board (PFTDB) Printer control board (PRCB)
Remedy: 1 Check the M23 connector for proper connection and correct as necessary. - - 2 Check the connector of M23 for proper drive coupling and correct as necessary. - - 3 PS22 I/O check, sensor check PFTDB CN16-6 (ON) X-6 4 M23 operation check PFTDB CN14-3 to 4 X-9 5 Change M23 - - 6 Change PFTDB - - 7 Change PRCB