Description: Tray 4 feeder up/down abnormality • The tray 4 upper limit sensor is not blocked even after the lapse of a given period of time after the lifting motion has been started.
Causes: Tray 4 upper limit sensor (PS27) Tray 4 lift-up motor (M24) Paper feed/transport drive board (PFTDB) Printer control board (PRCB)
Remedy: 1 Check the M24 connector for proper connection and correct as necessary. - - 2 Check the connector of M24 for proper drive coupling and correct as necessary. - - 3 PS27 I/O check, sensor check PFTDB CN18-6 (ON) X-8 4 M24 operation check PFTDB CN14-1 to 2 X-9 5 Change M23 - - 6 Change PFTDB - - 7 Change PRCB