Description: No relay circuit boards for IC-414 mounting at IC-414 mount setting. EFI relay circuit boards (VI-506) are not mounted when the IC-414 is set to mount setting at Service Mode.
Remedy: • MFP board (MFPB) • EFI relay board (VI-506) 1 If the IC-414 is not mounted, access [Service Mode] -> [System 2] -> [Image Controller Setting] and check to see if “Controller 0” is set for [Image Controller Setting]. - - 2 Check the EFI relay board (VI-506) connector for proper connection and correct as necessary. - - 3 Replace EFI relay board (VI-506) - - 4 Replace MFPB.