Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi C0202 — Konica-Minolta bizhub C558

Code: C0202

Description: Tray 1 feeder up/down abnormality. The tray 1 upper limit sensor (PS25) is not turned ON (blocked) even after the set period of time has elapsed after the paper lift-up operation for the drawer began.
Causes: • Tray 1 lift-up motor (M12) • Tray 1 upper limit sensor (PS25) • MFP board (MFPB)
Remedy: 1. Remove the tray and check to see if a piece of paper is not left inside the machine. 2. Check the connector between M12-MFPB CN19E for proper connection and correct as necessary. 3. Check the connector of M12 for proper drive coupling and correct as necessary. 4. Check the connector between PS25-relay CN30-MFPB CN26E for proper connection and correct as necessary. 5. PS25 I/O check, sensor check • Control signal: MFPB CN26E-3 (ON) • Location of electrical component: 25-C 6. M12 operation check • Control signal: MFPB CN19E-5 (REM) • Location of electrical component: 21-C 7. Replace M12. 8. Replace MFPB.

← Xem tất cả mã lỗi Konica-Minolta bizhub C558

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie