Description: Drum/Development unit (C) failure, Drum/Development unit (M) failure, Drum/Development unit (Y) failure, Drum/Development unit (K) failure • All density readings taken from the density pattern produced on the transfer belt are 1.0 g/m2 (IDC sensor photo receiver output) or less during max. density adjustment (Vg/Vdc adjustment). • All density readings taken from the density pattern produced on the transfer belt are 5.0 g/m2 (IDC sensor photo receiver output) and more during max. density adjustment (Vg/Vdc adjustment).
Causes: • Drum unit/Y,M,C,K • Developing unit/Y,M,C,K • IDC sensor/Fr (IDCS/Fr) • IDC sensor/Rr (IDCS/Rr) • IDC sensor shutter solenoid (SD2) • MFP board (MFPB) • High voltage unit (HV) • Transfer belt unit
Remedy: 1. Select [Imaging Process Adjustment] -> [Max Image Density Adj] and, if the setting value is negative, readjust. 2. Check the drive transmission portion of the drum/developing unit and correct as necessary. 3. Clean the IDC sensor/Fr (IDCS/Fr) or IDC sensor/Rr (IDCS/Rr) window if dirty. 4. Clean the contact of the drum/developing unit connector if dirty. 5. Check the HV connector for proper connection and correct as necessary. 6. SD2 operation check. 7. Replace the drum unit. 8. Replace the developing unit. 9. Replace the transfer belt unit. 10. Replace HV. 11. Replace MFPB.