Description: Paper exit roller drive motor malfunction <When FS-526 is installed> • The exit roller motor (M4) lock signal remains set to H for a set period of time while the exit roller motor (M4) is turning.
Causes: Exit roller motor (M4) FS control board (FSCB)
Remedy: 1 Check the motor and sensor connectors for proper connection, and correct as necessary. - - 2 Check the connector of M4 for proper drive coupling, and correct as necessary. - - 3 M4 operation check FSCB CN18-3 to 10 FS-526 D-12 4 Change M4 - - 5 FSCB ICP2 conduction check - - 6 Change FSCB