Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi C6754 — Konica-Minolta bizhub C652

Code: C6754

Description: CIS clamp adjustment failure
• After the gain adjustment is performed at the start-up, the CIS clamp adjustment value is too high or too low.
Causes: CIS module (CIS) DS image processing board (DSIPB) CIS inverter board (CINVB) CIS power supply (CISPU) MFP board (MFPB)
Remedy: 1 Correct the harness connection between CIS and DSIPB if faulty. - - 2 Correct the harness connection between CIS and CINVB if faulty. - - 3 Correct the harness connection between CIS and CISPU if faulty. - - 4 Check for possible extraneous light and correct as necessary. - - 5 Clean the back side reading glass and the shading sheet if dirty. - - 6 Change CIS - - 7 Change DSIPB - - 8 Change CINVB - - 9 Change CISPU - - 10 Change MFPB

← Xem tất cả mã lỗi Konica-Minolta bizhub C652

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie