Description: Center-staple paper exit motor malfunction <When FS-526+SD-508 is installed> • The exit motor (M34) lock signal remains set to H for a set period of time while the exit motor (M34) is turning.
Causes: Exit motor (M34) SD drive board (SDDB) FS control board (FSCB)
Remedy: 1 Check the motor and sensor connectors for proper connection, and correct as necessary. - - 2 Check the connector of M34 for proper drive coupling, and correct as necessary. - - 3 M34 operation check - SD-508 G-3 to 4 4 Change M34 - - 5 SDDB ICP12 conduction check - - 6 Change SDDB - - 7 Change FSCB