Description: Slider over running • The scanner home sensor detects the scanner at its home position during a period of time that begins with the time when a pre-scan command and a scan preparation command are executed and ends when a home return command is executed.
Causes: Scanner home sensor (PS201) Scanner motor (M201) Scanner relay board (REYB/SCAN) MFP board (MFPB)
Remedy: 1 Correct or change the scanner drive (cable, pulley, gear, belt) if it is faulty. - - 2 Correct the scanner motor set screw if loose. - - 3 Adjust [Image Position Leading Edge] and [Feed Direction Adjustment]. - - 4 Check the PS201, M201, REYB/SCAN and MFPB connector for proper connection and correct as necessary. - - 5 PS201 I/O check, sensor check REYB/SCAN PJ3-5 (ON) P-17 6 M201 operation check REYB/SCAN PJ5-4 to 7 W-19 7 Change REYB/SCAN. - - 8 Change MFPB.