Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi C0208 — Konica-Minolta bizhub C654e

Code: C0208

Description: Tray 4 feeder up/down abnormality
The tray 4 upper limit sensor is not blocked even after the lapse of a given period of time after the lifting motion has been started.
Causes: • Tray 4 upper limit sensor (PS27) • Tray 4 lift-up motor (M24) • Paper feed/transport drive board (PFTDB) • Printer control board (PRCB)
Remedy: 1 Check the connector between M24-PFTDB CN18 for proper connection and correct as necessary. 2 Check the connector of M24 for proper drive coupling and correct as necessary. 3 Check the connector between PS27-relay CN194-relay CN121B-PFTDB CN22 for proper connection and correct as necessary. 4 PS27 I/O check, sensor check PFTDB CN22-6 (ON) 8-X. 5 M24 operation check PFTDB CN18-1 to 2 9-X. 6 Replace M24. 7 PFTDB ICP8 conduction check. 8 Replace PFTDB. 9 Replace PRCB.

← Xem tất cả mã lỗi Konica-Minolta bizhub C654e

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie