Description: Paper transport belt motor’s malfunction <When FS-535+SD-512 is installed> Even after a predetermined period of time has elapsed since the paper transport belt motor (M34) starts operation, the lock signal is not set to L (turning).
Causes: • Paper transport belt motor (M34) • SD drive board (SDDB) • FS control board (FSCB)
Remedy: 1 Check the connectors between M34-relay CN1-FSCB CN42 for proper connection, and correct as necessary. 2 Check the connector of M34 for proper drive coupling, and correct as necessary. 3 M34 operation check SDDB CN1-1 to 11 SD-512 7-D. 4 Replace M34. 5 FSCB ICP12 conduction check. 6 Replace SDDB. 7 Replace FSCB.