Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi C1145 — Konica-Minolta bizhub C658

Code: C1145

Description: Trailing edge stopper motor malfunction (When FS-534 or FS-534SD is installed) The trailing edge stopper home position detection sensor (PS20) is not turned ON (blocked) or OFF (unblocked) even after the set period of time has elapsed after the trailing edge stopper motor (M6) is turned ON.
Causes: • Trailing edge stopper motor (M6) • Trailing edge stopper home position detection sensor (PS20) • FS control board (FSCB)
Remedy: 1. Check the connector between M6-FSCB J5 for proper connection and correct as necessary. 2. Check the connector of M6 for proper drive coupling and correct as necessary. 3. Check the connector between PS20-relay CN22-FSCB J5 for proper connection and correct as necessary. 4. PS20 I/O check, sensor check • Control signal: FSCB J5-9 (ON) • Location of electrical component: FS-534 9-K 5. M6 operation check • Control signal: FSCB J5-13 to 16 • Location of electrical component: FS-534 9-K 6. Replace M6. 7. Replace FSCB.

← Xem tất cả mã lỗi Konica-Minolta bizhub C658

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie