Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi C11E1 — Konica-Minolta bizhub C658

Code: C11E1

Description: Paper exit switching drive malfunction (When FS-534 or FS-534SD is installed) The exchange folded knife home position sensor (PS30) is not turned ON (blocked) or OFF (unblocked) even after the set period of time has elapsed after the FNS entry transport motor (M2) is turned ON.
Causes: • FNS entry transport motor (M2) • Exchange folded knife home position sensor (PS30) • FS control board (FSCB)
Remedy: 1. Check the connector between M2-FSCB J9 for proper connection and correct as necessary. 2. Check the connector of M2 for proper drive coupling and correct as necessary. 3. Check the connector between PS30-FSCB J4 for proper connection and correct as necessary. 4. PS30 I/O check, sensor check • Control signal: FSCB J4<A>-15 (ON) • Location of electrical component: FS-534 12-C 5. M2 operation check • Control signal: FSCB J9<A>-1 to 4 • Location of electrical component: FS-534 10 to 11-B to C 6. Replace M2. 7. Replace FSCB.

← Xem tất cả mã lỗi Konica-Minolta bizhub C658

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie