Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi C4801 — Konica-Minolta bizhub C754

Code: C4801

Description: Main unit board failure
MFP detects simultaneous replacement of multiple boards.
Causes: • SSD board (SSDB) • Printer control board (PRCB)
Remedy: 1 Reinstall the old PRCB. 2 Back up data. 2.1. Call the Service Mode to the screen. 2.2. Call the Enhanced Security to the screen. 2.3. Touch [Engine Data Backup]. 2.4. Touch [Engine Data Save mode], and press the Start key. 2.5. Select [Yes], and press the Start key again. 2.6. Check that the result OK appears. 3 Replace PRCB Turn OFF the main power switch and replace the current PRCB with a new one. (When using a PRCB of another machine in service, be sure to use a PRCB installed in the same model.) 4 Restore back up data. 4.1. Turn ON the main power switch. 4.2. Check that the trouble code C4802 appears and then display service mode. 4.3. Call the Enhanced Security to the screen. 4.4. Touch [Engine Data Backup]. 4.5. Touch [Engine Data Load mode], and press the Start key. 4.6. Select [Yes], and press the Start key again. 4.7. Check that the result OK appears. 4.8. Turn OFF the main power switch and turn it ON again more than 10 seconds after. 5 Update the PRCB firmware. 6 If the above actions do not solve the problem, contact KMBT.

← Xem tất cả mã lỗi Konica-Minolta bizhub C754

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie