Code: C-1174
Description: The operation does not complete within a specified period of time after the SD saddle stapler motor (M102) starts operations,
Causes: • FNS control board (FNSCB) • SD control board (SDCB) • SD stapler motor (M102) DIPSW47-2
Remedy: 1. Check the connector connection and the wiring between SDCB and the motor, and repair it if any abnormality. 2. Check the connector connection and the wiring between FNSCB and SDCB, and repair it if any abnormality. 3. Check the I/O drive of the motor and the coupling of the gear, and repair/replace it if any abnormality. (Wiring diagram: SD-510: 4-G) 4. Replace M102. 5. Replace SDCB. 6. Replace FNSCB.