Code: C-1232
Description: An error detection signal is detected continuously for a specified period of time while the entrance conveyance motor (M1) is ON.
Causes: • Paper lift motor /Lw (M9) • PI drive board (PIDB) • PI lift plate home sensor /Lw (PS40) • PI upper limit sensor /Lw (PS38)
Remedy: 1. Check the entrance conveyance section, and clean/repair it if any abnormality. 2. Check the connector connection and the wiring between PDB and the motor, and repair it if any abnormality. 3. Check the I/O drive of the motor and the coupling of the gear, and repair/replace it if any abnormality. (Wiring diagram: FD-503: 3-D) 4. Replace M1. 5. Replace PDB.