Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi C-1234 — Konica-Minolta bizhub PRESS 1052

Code: C-1234

Description: An error detection signal of M7 is detected continuously for a specified period of time while the PI conveyance motor (M7) is ON.
Causes: • PI conveyance motor (M7) • PI drive board (PIDB) DIPSW6-2
Remedy: 1. Check the PI conveyance section, and clean/repair it if any abnormality. 2. Check the connector connection and the wiring between PIDB and the motor, and repair it if any abnormality. 3. Check the I/O drive of the motor and the coupling of the gear, and repair/replace it if any abnormality. (Wiring diagram: FD-503: 9-A) 4. Replace M7. 5. Replace PIDB.

← Xem tất cả mã lỗi Konica-Minolta bizhub PRESS 1052

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie