Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi C-1233 — Konica-Minolta bizhub PRESS 1250

Code: C-1233

Description: An error detection signal of M3 is detected continuously for a specified period of time while the intermediate conveyance motor (M3) is ON.
Causes: • Intermediate conveyance motor (M3) • Punch drive board (PDB)
Remedy: 1. Check the intermediate conveyance section, and clean/repair it if any abnormality. 2. Check the connector connection and the wiring between PDB and the motor, and repair it if any abnormality. 3. Check the I/O drive of the motor and the coupling of the gear, and repair/replace it if any abnormality. (Wiring diagram: FD-503: 4-D) 4. Replace M3. 5. Replace PDB.

← Xem tất cả mã lỗi Konica-Minolta bizhub PRESS 1250

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie