Code: C-1225
Description: The 3 holes/4 holes punch home sensor (PS9) does not turn OFF within a specified period of time after the 3 holes/4 holes punch home position return operation starts. Or, after the punch motor (M10) turns ON, the 3 holes/4 holes punch home sensor (PS9) does not turn OFF.
Causes: • Punch motor (M10) • Punch drive board (PDB) • 3 holes/4 holes home sensor (PS9) DIPSW6-0
Remedy: 1. Check the 3-hole/4-hole punch section, and clean/repair it if any abnormality. 2. Check the connector connection and the wiring between FDB and motor/sensor, and repair it if any abnormality. 3. Check the I/O drive of the motor and the coupling of the gear, and repair/replace it if any abnormality. (Wiring diagram:FD-503:5-F) 4. Check I/O and the operation of the sensor, and repair/replace it if any abnormality. (Wiring diagram:FD-503:5-E) 5. Replace PS9. 6. Replace M10. 7. Replace PDB.