Code: C-2810
Description: Drum potential sensor (DPS) output abnormality 3. While in the drum potential correction, a patch for control is not output with the V1 getting to more than 350V. When this condition is detected 5 times in succession, the error code is displayed.
Causes: • Drum potential sensor (DPS) • Drum potential sensor board (DPSB) • Printer control board (PRCB)
Remedy: 1. Check the DPS, and clean/replace it if any abnormality or dirt on sensor (Wiring diagram: Main body (3/4): 19-J) 2. Check the connector connection and the wiring between PRCB and DPS, and repair it if any abnormality. 3. Replace DPS. 4. Replace DPSB. 5. Replace PRCB.