Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi SC18-13 — Konica-Minolta bizhub Pro 1050

Code: SC18-13

Description: When the upper limit sensor /1 (PS6) is OFF, the PS6 does not turn ON within 20 seconds after the paper lift motor /1 (M25) turns ON for lifting operation. And at this time, an error detection signal is not detected.
Causes: Paper lift motor /1 (M25)
Remedy: No error code is displayed on the operation board, but displayed only on the data collection, the list output and the CSRC. Since the lifting operation of the tray is not completed, "Set paper in the tray 1" is displayed on the operation board.

← Xem tất cả mã lỗi Konica-Minolta bizhub Pro 1050

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie