Code: SC23-14
Description: The toner conveyance abnormality is detected. When toner is supplied for 8 minutes and the toner remaining sensor /1 (PS31) does not turn ON, it is found that the toner remaining sensor /3 (PS33) of the large capacity hopper turns ON for the last 15 seconds in succession.
Causes: Toner pump motor (M28) Air pump motor (M29) Toner remaining sensor /1 (PS31) Toner remaining sensor /3 (PS33) Note: • When the code SC23- 14 occurs, be sure to repair defective parts before setting the software DIPSW3-1 to 0. Setting the DIPSW3-1 to 0 without repairing defective parts may cause toner to overflow inside and outside of the machine.
Remedy: The main body stops immediately to turn OFF the RL1 (main).