Code: SC53-14
Description: The blowout of a fuse for the SD/ CL in the vertical conveyance is detected 2. The blowout of a fuse for the SD/CL in the printer control board (PRCB) is checked. At the start, an error detection signal (blowout of a fuse for the solenoid/ clutch) is detected. However, an error detection signal (24V cut off) is not detected.
Causes: Tray lock solenoid /1 (SD1), /2 (SD2), /3 (SD5) Drum claw solenoid (SD5) Pre-registration clutch /1 (CL1), /2 (CL3) Vertical conveyance clutch (CL2) Printer control board (PRCB)
Remedy: The main body stops immediately to turn OFF the RL1 (main).