Code: SC18-12
Description: When the upper limit sensor /1 (PS6) is OFF, the PS6 does not turn ON within 20 seconds after the paper lift motor /1 (M25) turns ON for lifting operation. And at this time, an error detection signal (blowout of a fuse) is detected.
Causes: Printer control board (PRCB)
Remedy: No error code is displayed on the operation board, but displayed only on the data collection, the list output and the CSRC. Since the lifting operation of the tray is not completed, "Set paper in the tray 1" is displayed on the operation board.