Code: 5C
Description: The pump stops abnormally during purging operation.
Causes:
Remedy: Purge cam gear broken Abnormal load applied to the purge cam PF encoder disk being in contact with the upper cover and deformed PF roller gear L broken Switching arm assembly broken Foreign materials in the machine Clutch gear broken PF sensor PCB defective Main PCB defective Power supply PCB defective Paper feed motor defective Replace the maintenance unit. Replace the PF encoder disk. Replace the engine unit. Replace the maintenance unit. Remove foreign materials. Replace the clutch gear. Replace the PF sensor PCB. Replace the main PCB. Replace the power supply PCB. Replace the paper feed motor.