Code: C-0110
Description: Abnormality of the registration section motor power in the ADU drive board (ADUDB). The error detection signals (blowout of ICP) of the ADU conveyance motor /2 (M16), the registration motor (M17) and the loop motor (M18) are detected after the print is started.
Causes: ADU conveyance motor /2 (M16) Registration motor (M17) Loop motor (M18) ADU drive board /2 (ADUDB2)
Remedy: 1 Check the connector connection and the wiring between ADUDB and the motor, and repair it if any abnormality. - 2 Check the I/O drive of the motor and the coupling of the gear, and repair/replace it if any abnormality, and then replace ADUDB2. 23-L, 24-L 3 Replace ADUDB2. - 4 Replace M16, M17, M18 and ADUDB2 at a time.