Code: C-0111
Description: Abnormality of the duplex section motor power in the ADU drive board (ADUDB). The error detection signals (blowout of ICP) of the ADU reverse motor (M12), the reverse/exit motor (M13), the ADU accelerate motor (M14) and the ADU conveyance motor /1 (M15) are detected after the print is started.
Causes: ADU reverse motor (M12) Reverse/exit motor (M13) ADU accelerate motor (M14) ADU conveyance motor /1 (M15) ADU drive board /1 (ADUDB1)
Remedy: 1 Check the connector connection and the wiring between ADUDB and the motor, and repair it if any abnormality. - 2 Check the I/O drive of the motor and the coupling of the gear, and repair/replace it if any abnormality, and then replace ADUDB1. 21-L, 22-L 3 Replace ADUDB1. - 4 Replace M12, M13, M14, M15 and ADUDB1 at a time.