Code: C-0114
Description: Abnormality 2 of the SD/CL_24V power for the printer control board (PRCB) tray. When the error detection signal of the PRCB tray solenoid/clutch ICP blowout is detected but no 24V cut off is detected at the start.
Causes: Paper feed clutch /1 (CL4) Separation clutch /1 (CL5) Paper feed clutch /2 (CL6) Separation clutch /2 (CL7) Pick-up solenoid /1 (SD3) Pick-up solenoid /2 (SD4) Printer control board (PRCB)
Remedy: 1 Check the connector connection and the wiring related to DC24V between PRCB and clutch/solenoid, and repair it if any abnormality. - 2 Check the drive and the coupling of the clutch and the solenoid, repair it if any abnormality, and then replace PRCB. 5-F, 8-F 3 Replace PRCB. - 4 Replace the clutch, the solenoid and PRCB at a time.