Code: C-0116
Description: Abnormality 2 of the SD/CL_24V power for the printer control board (PRCB) tray. When the error detection signal of the PRCB tray solenoid/clutch ICP blowout is detected but no 24V cut off is detected at the start.
Causes: Pre-registration clutch /1 (CL1) Vertical conveyance clutch (CL2) Pre-registration clutch /2 (CL3) Erase lamp (EL) Tray lock solenoid /1 (SD1) Tray lock solenoid /2 (SD2) Drum claw solenoid (SD10) Printer control board (PRCB)
Remedy: 1 Check the connector connection and the wiring related to DC24V between PRCB and clutch/solenoid/EL, and repair it if any abnormality. - 2 Check the drive and the coupling of the clutch, the solenoid and EL, repair/replace it if any abnormality, and then replace PRCB. 10-F, 5-M 3 Replace PRCB. - 4 Replace the clutch, the solenoid, EL and PRCB at a time.