Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi C-0208 — Konica-Minolta bizhub Pro 1051

Code: C-0208

Description: The locking of the tray lift-up motor /2 (M34) is detected. When M34 is ON, an error detection signal of the M34 is detected.
Causes: Tray lift-up motor /2 (M34) Printer control board (PRCB)
Remedy: 1 Check the connector connection and the wiring between PRCB and the motor, and repair it if any abnormality. - 2 Check the I/O drive of the motor and the coupling of the gear, and repair/replace it if any abnormality. 8-F 3 Replace M34. - 4 Replace PRCB.

← Xem tất cả mã lỗi Konica-Minolta bizhub Pro 1051

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie