Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi C-1140 — Konica-Minolta bizhub Pro 1051

Code: C-1140

Description: Paper exit arm motor (M23) operation abnormality. After the operation of M23 starts, the exit arm home sensor (PS9) does not turn ON within a specified period of time. Or, it operates for more than the allowed time at a speed out of the specified one. 35-1
Causes: Paper exit arm home sensor (PS9: FS-521) Paper exit arm motor (M23: FS-521) FNS drive board (FNSDB: FS-521) FNS control board (FNSCB: FS-521)
Remedy: 1 Check the paper exit arm section, and clean/repair it if any abnormality. - 2 Check the connector connection and the wiring between FNSDB and motor/sensor, and repair it if any abnormality. - 3 Check the connector connection and the wiring between FNSDB and FNSCB, and repair it if any abnormality. - 4 Check the I/O drive of the motor and the coupling of the gear, and repair/replace it if any abnormality. FS-521: 6-G 5 Check I/O and the operation of the sensor, and repair/replace it if any abnormality. FS-521: 3-G 6 Replace PS9. - 7 Replace M23. - 8 Replace FNSDB. - 9 Replace FNSCB.

← Xem tất cả mã lỗi Konica-Minolta bizhub Pro 1051

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie