Code: C-1145
Description: Paper exit alignment motor /Rr (M14) abnormality The paper exit alignment plate home sensor /Fr (PS19) does not turn ON even after a specified period of time after M14 starts the home position search operation. Or, even after a specified period of time after M14 starts the operation, it does not stop. 35-1
Causes: Paper exit alignment plate home sensor /Rr (PS19: FS-521) Paper exit alignment motor /Rr (M14: FS-521) FNS drive board (FNSDB: FS-521) FNS control board (FNSCB: FS-521)
Remedy: 1 Check the rear side of the paper exit alignment section, and clean/repair it if any abnormality. - 2 Check the connector connection and the wiring between FNSDB and motor/sensor, and repair it if any abnormality. - 3 Check the connector connection and the wiring between FNSDB and FNSCB, and repair it if any abnormality. - 4 Check the I/O drive of the motor and the coupling of the gear, and repair/replace it if any abnormality. FS-521: 7-G 5 Check I/O and the operation of the sensor, and repair/replace it if any abnormality. FS-521: 7-G 6 Replace PS19. - 7 Replace M14. - 8 Replace FNSDB. - 9 Replace FNSCB.